Narrow-Groove Slip-Resistant WPC Deck Board combines a closely spaced grooved surface with a wood-plastic composite decking profile. The linear groove pattern provides a defined walking surface for outdoor areas where surface texture, board dimensions, and slip-resistant performance need to be specified together. Hollow and solid structures are available in standard decking sizes and lengths.
Product Positioning
Narrow-Groove Surface
Closely spaced longitudinal grooves create a regular walking texture across the board. The profile provides a cleaner, more controlled surface pattern than deep embossed decking.
Slip-Resistant Decking
The grooved surface is suitable for outdoor flooring where walking-surface texture is part of the specification. Selected configurations can be supplied with R11 slip-resistant performance.
WPC Construction
The standard material formulation uses approximately 60% wood fibers, 35% HDPE, and 5% additives. The composite is processed into continuous decking profiles for exterior applications.
Key Product Advantages
Defined Groove Pattern
The narrow grooves form repeated contact edges along the walking surface. Their closely spaced arrangement gives the board a consistent linear texture across the finished deck.
Two Board Structures
Hollow and solid constructions are available for different deck layouts and structural requirements. Structure selection can be coordinated with joist spacing, deck height, and installation details.
Project Specification Control
Board section, length, surface, structure, and color can be confirmed before production. This allows the decking specification to correspond with the planned installation system.
Material & Surface
WPC Composition
The standard composition is approximately 60% wood fibers, 35% HDPE, and 5% additives. This material system is used for the extrusion of WPC decking profiles.
Groove Surface
The grooves run continuously along the board length and form the primary walking texture. Groove configuration is defined as part of the product profile.
Color Selection
Standard colors are available, with project-specific color requirements confirmed before production. Color should be specified together with board structure and surface configuration.
Technical Specifications
|
Parameter |
Standard / Reference Value |
|
Product Type |
Narrow-Groove Slip-Resistant WPC Deck Board |
|
Material |
60% Wood Fibers + 35% HDPE + 5% Additives |
|
Hollow Size |
140 × 23 mm, 145 × 21 mm, 140 × 25 mm |
|
Solid Size |
140 × 20 mm, 140 × 22 mm, 138 × 24 mm |
|
Length |
1.8–5.9 m |
|
Structure |
Hollow or Solid |
|
Surface |
Narrow-Groove |
|
Slip Resistance |
Selected configurations with R11 performance |
|
Color |
Standard or Project-Specified |
|
Customization |
Size, Length, Structure, Surface, Color |
Application Selection
Pool Surrounds
The profile can be specified for poolside decks and outdoor leisure areas where moisture exposure and walking-surface texture are key selection points.
Terraces & Balconies
The board suits terraces, balconies, patios, and rooftop outdoor areas where the profile dimensions need to coordinate with the supporting structure and deck layout.
Walkways & Landscapes
Garden paths, landscape platforms, pedestrian walkways, and exterior flooring can use the narrow-groove profile where a regular linear surface is required.
Commercial Outdoor Areas
Outdoor areas in hospitality, recreation, and public landscape projects can specify the board by section, structure, length, color, and required surface performance.
Specification Matching
Board Dimensions
Select the board section according to joist spacing, finished deck height, edge details, and the installation system. Width and thickness should be confirmed before layout planning.
Hollow or Solid
Hollow construction uses a reduced material section and provides a lighter board profile. Solid construction provides a denser cross-section for applications requiring a solid board structure.
Surface Requirement
The narrow-groove profile is suitable when closely spaced longitudinal grooves are required instead of a deep embossed wood-grain surface.
Manufacturing & Quality Control
Profile Extrusion
The WPC compound is processed through profile extrusion to form the specified board section and continuous groove pattern. Profile dimensions are controlled during production.
Dimensional Inspection
Inspection covers board width, thickness, length, groove consistency, surface condition, and profile dimensions against the confirmed specification.
Final Inspection
Finished boards are checked before packing for dimensions, structure, surface condition, appearance, and quantity. Inspection results are matched with the production specification.
Project & Packaging Considerations
Length Planning
Standard lengths range from 1.8–5.9 m. Length selection can be coordinated with the deck layout to reduce cutting requirements and improve material planning.
Packing
Packing quantities and configuration can be arranged according to order volume, board length, container loading, and handling requirements.
Specification Confirmation
Before production, confirm board size, length, structure, surface, color, quantity, installation method, and application area. These details define the production and packing requirements.
FAQ
Q: What is the main difference between narrow-groove and other WPC deck profiles?
A: The narrow-groove profile uses closely spaced longitudinal grooves to create a regular textured walking surface and a controlled linear appearance.
Q: Are hollow and solid structures available?
A: Yes. Both hollow and solid structures are available, allowing the board section to be matched with different installation requirements.
Q: What standard lengths are available?
A: Standard lengths range from 1.8–5.9 m. Specific length requirements can be confirmed according to the production specification.
Q: Can R11 slip-resistant performance be specified?
A: Yes. Selected configurations can be supplied with R11 slip-resistant performance when this requirement is included in the product specification.
Q: Can the board size and color be customized?
A: Yes. Board size, length, structure, surface configuration, and color can be specified according to the project requirements.
Hot Tags: narrow-groove slip-resistant wpc deck board, China narrow-groove slip-resistant wpc deck board manufacturers, suppliers, factory, Classic Traditional WPC Decking, Composite Deck Stair Nosing













