Fine-Texture Slip-Resistant WPC Deck Board is an outdoor decking profile with a fine-textured walking surface and wood-plastic composite construction. Hollow and solid structures are available, with standard profile sizes and lengths for residential, commercial, and landscape decking projects. Surface texture, structure, dimensions, color, and length can be specified according to the deck layout and installation system.
Product Positioning
Fine-Texture Surface
The fine-textured finish provides a defined walking surface with a relatively fine visual pattern. It is suitable for projects where surface appearance and underfoot texture are both part of the product specification.
Slip-Resistant Use
The textured surface creates additional contact between footwear and the board. It can be specified for outdoor areas where walking conditions and surface traction are considered during material selection.
Profile Options
Hollow and solid structures are available in several standard dimensions. Selection can be based on support spacing, board span, loading requirements, handling, and installation method.
Material & Construction
WPC Composition
The standard formulation uses approximately 60% wood fibers, 35% HDPE, and 5% other additives. This composition forms the material base for the decking profile.
Hollow Structure
Hollow profiles provide a lighter cross-section and are available in multiple standard sizes. They can be considered where board weight, handling, and material efficiency are relevant to the installation plan.
Solid Structure
Solid profiles provide a continuous cross-section. They are available in several thickness options and can be selected according to the required board section and installation conditions.
Surface Specification
Fine Texture
The surface uses a fine-texture pattern for a consistent visual and tactile finish. Surface appearance can be checked against a physical sample before production.
Color Options
Standard colors include Light Teak, Dark Teak, Red, Chocolate, Dark Brown, Grey, and Black. Project-specific color requirements can be confirmed during specification review.
Technical Specifications
|
Parameter |
Specification |
|
Material |
60% Wood Fibers + 35% HDPE + 5% Additives |
|
Hollow Size |
140 × 23 mm / 145 × 21 mm / 140 × 25 mm |
|
Solid Size |
140 × 20 mm / 140 × 22 mm / 138 × 24 mm |
|
Length |
1.8–5.9 m |
|
Structure |
Hollow / Solid |
|
Surface |
Fine Texture |
|
Standard Colors |
Light Teak / Dark Teak / Red / Chocolate / Dark Brown / Grey / Black |
|
Thermal Expansion |
Approx. 0.3–0.5% |
|
Service Life |
25–30 years |
Performance Focus
Surface Contact
The fine-textured profile provides a defined contact surface for outdoor walking areas. Where a specific slip-resistance classification is required, the applicable test method and project requirement should be confirmed before selection.
Outdoor Exposure
The WPC construction is intended for exterior decking applications exposed to moisture, sunlight, and temperature changes. Drainage, ventilation, board spacing, and substructure conditions remain part of the installation specification.
Dimensional Movement
Temperature changes can cause dimensional movement in WPC profiles. The standard installation guidance indicates approximately 0.3–0.5% expansion, which should be considered when determining board gaps and boundary clearance.
Application Selection
Terraces & Balconies
Suitable for residential terraces, balconies, patios, and garden decks where a textured outdoor walking surface is required.
Poolside & Pathways
The profile can be specified for pool surrounds, garden paths, landscape walkways, and similar exterior areas where surface texture forms part of the material selection.
Commercial Areas
Suitable for outdoor terraces, recreational platforms, landscaped walkways, and other projects requiring defined board dimensions and repeatable surface specifications.
Profile Selection
Hollow Profiles
Available in 140 × 23 mm, 145 × 21 mm, and 140 × 25 mm configurations. Selection can be matched to support spacing, board span, handling requirements, and deck layout.
Solid Profiles
Available in 140 × 20 mm, 140 × 22 mm, and 138 × 24 mm configurations. The continuous section can be selected where the project specification calls for a solid profile.
Board Length
Standard lengths range from 1.8–5.9 m. Length selection can be coordinated with deck dimensions, cutting plans, packaging, and transport requirements.
Installation Considerations
Board Gaps
A minimum 1 mm board gap is indicated in the standard installation guidance. Actual spacing should account for board length and local temperature conditions.
Boundary Clearance
A 10 mm clearance from fixed boundaries is included in the standard installation guidance to accommodate dimensional movement.
Joist Spacing
Support spacing should be determined according to the selected profile, installation direction, expected loading, and applicable project requirements.
Quality & Production Control
Material Control
Wood fiber, HDPE, and additives are proportioned according to the selected formulation. Controlled material preparation supports consistent profile production.
Profile Inspection
Finished boards can be checked for width, thickness, length, surface condition, color, structure, and visual consistency before packing.
Documentation
Product specifications, available certificates, inspection records, and installation information can be prepared according to the requirements of the intended market and project.
Specification Confirmation
Product Data
Confirm board width, thickness, structure, length, surface texture, color, and quantity before production.
Sample Approval
A physical sample can be used to confirm surface appearance, color, texture, and profile dimensions before bulk production.
Project Details
Provide the deck layout, support system, application area, expected quantity, and installation requirements when project-specific technical confirmation is required.
FAQ
Q: What standard sizes are available?
A: Hollow profiles include 140 × 23 mm, 145 × 21 mm, and 140 × 25 mm. Solid profiles include 140 × 20 mm, 140 × 22 mm, and 138 × 24 mm.
Q: Are both hollow and solid structures available?
A: Yes. Both structures are available, allowing the profile to be selected according to the installation system, board section, and project requirements.
Q: What board lengths are available?
A: Standard lengths range from 1.8–5.9 m. Specific length requirements can be reviewed according to the production and installation specification.
Q: Can the surface and color be customized?
A: Yes. Fine-texture requirements and project-specific colors can be confirmed through sample approval before production.
Q: What information is needed for product selection?
A: The required dimensions, structure, length, color, application, estimated quantity, support spacing, and installation requirements provide the main information for specification confirmation.
Hot Tags: fine-texture slip-resistant wpc deck board, China fine-texture slip-resistant wpc deck board manufacturers, suppliers, factory, Classic Traditional WPC Decking, Composite Deck Stair Nosing
