Deep-Texture Slip-Resistant WPC Deck Board combines a pronounced 3D embossed wood-grain surface with a WPC decking profile for outdoor flooring where surface texture, board structure, dimensions, and slip resistance need to be specified together. Hollow and solid structures are available, with lengths from 1.8–5.9 m and selected configurations available with R11 slip-resistant performance.
Product Positioning
Slip-Resistant Decking
Suitable for outdoor flooring where surface traction forms part of the technical specification.
Deep-Texture Surface
The pronounced embossed pattern gives the board a defined textured finish with visible three-dimensional grain.
WPC Deck Board
The profile can be specified by structure, section size, length, color, and surface finish to match different project requirements.
Key Product Advantage
Defined Surface Texture
The deeper embossed pattern creates a more pronounced contact surface than a lightly textured decking finish.
3D Wood Grain
The surface reproduces a structured wood-grain pattern while retaining a consistent manufactured profile.
Hollow or Solid
Two structural options allow the section to be selected according to installation conditions, board dimensions, and project requirements.
Material and Construction
WPC Composition
The published material formulation uses 60% wood fiber, 35% HDPE, and 5% other additives. The formulation can be matched to the selected decking specification.
Hollow Structure
Hollow profiles use internal cavities within the board section, reducing internal material volume while maintaining the required external dimensions.
Solid Structure
Solid profiles provide a continuous internal section and are available in several standard thicknesses.
Surface Embossing
The 3D wood-grain texture is formed as part of the board surface finish. Texture, color, and profile are confirmed together for production.
Technical Specifications
|
Parameter |
Specification |
|
Product Type |
Deep-Texture Slip-Resistant WPC Deck Board |
|
Material |
60% Wood Fiber + 35% HDPE + 5% Additives |
|
Structure |
Hollow / Solid |
|
Surface |
3D Embossed Wood Grain |
|
Hollow Sizes |
140 × 23 mm, 140 × 25 mm, 145 × 21 mm |
|
Solid Sizes |
140 × 20 mm, 140 × 22 mm, 138 × 24 mm |
|
Length |
1.8–5.9 m |
|
Slip Resistance |
Selected configurations up to R11 |
|
Surface Finish |
Deep-Texture Embossed |
|
Color |
Standard / Customized |
Surface and Slip Selection
R11 Configuration
Where an R11 requirement applies, the exact board configuration should be confirmed before order release.
Texture Depth
The deep embossed finish is suitable for projects requiring a more pronounced surface profile rather than a lightly textured appearance.
Surface Matching
Color, embossing pattern, and board profile should be confirmed together where several production batches will be used on the same project.
Structure Selection
Hollow Board
A hollow section can be considered where board weight, material volume, and the installation system are important parts of the specification.
Solid Board
A solid section provides continuous material through the board and is available in 140 × 20 mm, 140 × 22 mm, and 138 × 24 mm configurations.
Installation Matching
Board thickness, support spacing, fixing method, and expected loading should be checked together before the final section is selected.
Typical Applications
Poolside Areas
Suitable for exterior flooring where moisture exposure and surface traction are key specification points.
Walkways and Terraces
The textured surface provides a defined finish for pedestrian outdoor areas.
Commercial Outdoor Areas
Applicable to hospitality, leisure, landscaping, and other exterior projects requiring consistent board dimensions and surface appearance.
Residential Decks
Suitable for patios, balconies, garden decks, and other residential outdoor flooring areas.
Project Specification
Board Dimensions
Confirm width, thickness, structure, and required board length before production.
Slip Requirement
State the required slip-resistance level and identify the corresponding decking configuration.
Surface Finish
Confirm the required embossing pattern, texture, and color before production when appearance consistency is required.
Installation Conditions
Support spacing, fixing arrangement, board orientation, drainage, and site conditions should be reviewed before profile selection.
Quality and Production Control
Dimensional Control
Width, thickness, length, and profile geometry are checked against the specified board dimensions.
Material Control
Material batching follows the selected formulation to maintain consistency in the finished decking profile.
Surface Inspection
Finished boards are checked for surface texture, color consistency, profile condition, and visible surface defects before packing.
Procurement Information
Standard Profiles
Standard sizes simplify repeat orders where the same section, length, and surface finish are required.
Custom Specifications
Applicable projects can specify dimensions, lengths, colors, surface finishes, and profile configurations according to production requirements.
Sample Confirmation
A physical sample can be reviewed before production when the project requires a specific texture, color, or surface appearance.
FAQ
Q: What board lengths are available?
A: Standard board lengths range from 1.8–5.9 m. Project-specific lengths can be reviewed according to the selected profile.
Q: Which structures are available?
A: Both hollow and solid structures are available. The final selection depends on the required section, installation method, and project conditions.
Q: Is R11 slip resistance available?
A: Selected configurations are available with R11 slip-resistant performance. The exact profile should be confirmed for the required specification.
Q: What profile sizes are available?
A: Common profiles include 140 × 20 mm, 140 × 22 mm, 140 × 23 mm, 140 × 25 mm, 145 × 21 mm, and 138 × 24 mm.
Q: Can the surface and color be customized?
A: Applicable projects can specify different colors, surface finishes, dimensions, and lengths according to the production specification.
Hot Tags: deep-texture slip-resistant wpc deck board, China deep-texture slip-resistant wpc deck board manufacturers, suppliers, factory, Classic Traditional WPC Decking, Composite Deck Stair Nosing
