WPC Wide Fluted Wall Board

WPC Wide Fluted Wall Board

WPC Wide Fluted Wall Board is an extruded wood-plastic composite profile for architectural wall surfaces requiring a broad linear pattern. The standard 218 × 24.5 mm section provides wider visual spacing across the installed wall than narrow fluted profiles. The standard formulation contains 60% wood fibers, 35% HDPE and 5% functional additives. Solid and hollow structures, wood grain, brushed and sanded surfaces, multiple colors and specified lengths are available.
Send Inquiry
Description
Technical Parameters

WPC Wide Fluted Wall Board is an extruded wood-plastic composite profile for architectural wall surfaces requiring a broad linear pattern. The standard 218 × 24.5 mm section provides wider visual spacing across the installed wall than narrow fluted profiles. The standard formulation contains 60% wood fibers, 35% HDPE and 5% functional additives. Solid and hollow structures, wood grain, brushed and sanded surfaces, multiple colors and specified lengths are available.

 

Product Structure

 

Wide Fluted Face
The broad flute creates a clear linear pattern with fewer repeated grooves across the wall surface. This section is suitable for large feature areas and architectural surfaces where wider visual spacing is required.


Extruded Profile
The board is produced as a continuous WPC extrusion. The defined cross-section remains consistent along the profile length for controlled installation alignment.


Solid or Hollow
Solid and hollow structures are available for different section requirements. Structure selection can be matched with the fixing system, wall construction and project specification.

 

Material Composition

 

WPC Formulation
The standard formulation contains 60% wood fibers, 35% HDPE and 5% functional additives. The controlled material ratio provides the base compound for profile extrusion and surface processing.


Surface Finish
Wood grain, brushed and sanded finishes are available. Each finish provides a different surface texture while retaining the same basic fluted section.

 

Key Product Advantage

 

Broad Flute Pattern
The wide flute produces a more open linear appearance than narrow-profile wall boards, making the section suitable for larger uninterrupted wall surfaces.


Controlled Section Geometry
Continuous extrusion keeps the specified width, thickness and flute configuration consistent along the board length, supporting accurate board-to-board alignment.


Multiple Configurations
Solid or hollow construction, three surface finishes, multiple colors and specified lengths allow the profile to be matched with different project specifications.


Standard Long Lengths
Available lengths include 2.9 m, 3.6 m and 4.8 m. Longer board formats can help reduce the number of horizontal joints in suitable wall layouts.

 

Technical Specifications

 

Parameter

Specification

Product Type

WPC Wide Fluted Wall Board

Material Ratio

60% Wood Fiber + 35% HDPE + 5% Additives

Standard Section

218 × 24.5 mm

Standard Lengths

2.9 / 3.6 / 4.8 m

Structure

Solid / Hollow

Surface Finish

Wood Grain / Brushed / Sanded

Manufacturing Process

Extrusion

Color

Multiple Options

Custom Section

Available

 

Size Selection

 

Standard Section
The 218 × 24.5 mm section provides a broad-format profile for wall layouts requiring wider flute spacing and a lower visual density.


Custom Dimensions
Section dimensions can be specified when a project requires a different visible width, thickness or profile configuration.


Length Planning
The available 2.9 m, 3.6 m and 4.8 m lengths can be selected according to wall height, panel layout and joint position. Specified lengths can be reviewed for project production.

 

Surface and Color Selection

Wood Grain

The embossed woodgrain surface adds visible texture to the fluted profile and is suitable for architectural surfaces requiring a timber-style appearance.

Brushed

The brushed finish creates a directional surface texture along the profile and provides a more structured visual effect.

Sanded

The sanded finish provides a finer surface texture for projects requiring a more restrained appearance.

 

Application Areas

 

Feature Walls
The broad flute pattern provides continuous vertical or horizontal detail for residential and commercial feature walls.


Exterior Walls
The profile can be specified for selected exterior wall applications where the product specification, fixing method and site conditions are suitable.


Commercial Interiors
The board can be used for decorative wall surfaces in offices, hospitality areas, retail spaces and reception zones.


Balconies and Terraces
The profile is suitable for selected balcony and terrace wall applications when the required construction and environmental conditions are confirmed.

 

Installation Considerations

 

Supporting Structure
The fixing surface should provide a stable and level base. Substructure spacing and fixing details should follow the selected profile and project conditions.


Board Alignment
The first board establishes the reference position for the remaining installation. Accurate positioning keeps the flute lines aligned across adjacent boards.


Joint Layout
Board length should be considered together with wall dimensions before installation. Planned joint positions help control cutting and material layout.


Edge Treatment
Corners, end points and exposed edges should be included in the installation plan to maintain a consistent finished profile.

 

Manufacturing Process

 

Material Preparation
Wood fibers, HDPE and functional additives are prepared according to the specified formulation before compounding.


Mixing and Extrusion
The prepared compound is mixed and processed through an extrusion line to form the defined fluted cross-section.


Cooling and Sizing
The extruded profile is cooled, stabilized and sized before being cut to the specified length.


Surface Processing
The selected wood grain, brushed or sanded finish is applied during the finishing stage according to the required surface specification.

 

Quality Control Points

 

Section Dimensions
Profile width, thickness and flute geometry are checked against the specified section to maintain dimensional consistency.


Surface Finish
Surface texture and color are inspected for consistency within the production batch.


Length Control
Finished boards are measured against the specified cutting length before packing and shipment.


Profile Protection
Packaging protects the board surface, corners and profile edges during handling, loading and transportation. 

 

Specification for Project Enquiries

 

Project enquiries should include section size, board length, structure, surface finish, color, quantity and intended application. A dimensional drawing or section reference can be provided when a custom profile is required. These details allow the required profile configuration and production specifications to be reviewed before order confirmation.

 

FAQ

 

Q: What is the standard size?

A: The standard WPC Wide Fluted Wall Board section is 218 × 24.5 mm.

Q: What lengths are available?

A: Standard lengths are 2.9 m, 3.6 m and 4.8 m. Specified lengths can be reviewed according to project requirements.

Q: Are solid and hollow structures available?

A: Yes. Both solid and hollow structures are available according to the required profile configuration and application.

Q: Which surface finishes are available?

A: The available finishes include wood grain, brushed and sanded surfaces.

Q: Can the profile size and color be customized?

A: Yes. Custom section dimensions and multiple color options can be specified for project requirements.

Hot Tags: wpc wide fluted wall board, China wpc wide fluted wall board manufacturers, suppliers, factory, Composite timber tube, High End Composite Cladding, Moisture Resistant Wall Panels, Stylish and Durable WPC Cladding, WPC Architectural Wall Cladding, WPC Square Tube Accessories