WPC Landscape Board is a wood-plastic composite board for garden construction, landscape edging, raised planting beds, planter structures and outdoor partitions. The standard formulation contains 60% wood fibers, 35% HDPE and 5% additives. Solid and hollow profiles are available, with board lengths from 1.8 to 5.9 m and defined options for profile size, surface and color.
Material & Board Construction
WPC Composition
The 60/35/5 formulation combines wood fibers with HDPE and additives to form a uniform composite profile. Material proportions are controlled as part of the product specification.
Profile Options
Solid and hollow constructions are available. Solid sections provide a denser cross-section for applications requiring greater section rigidity. Hollow sections provide a lighter board structure for suitable framed landscape assemblies.
Landscape Applications
Garden Edging
Boards can form continuous borders around lawns, planting beds and pathways. Defined board dimensions help maintain consistent edge height and alignment.
Raised Beds & Planters
The board can be assembled into raised planting beds and planter structures exposed to rainfall, humidity and soil contact.
Landscape Partitions
Board sections can be used for garden dividers, low landscape boundaries and outdoor partitions where a wood-grain surface is required.
Surface Selection
3D Wood Grain
3D embossed wood grain provides a textured surface with defined relief and a timber-style appearance for landscape installations.
Brushed & Sanded
Brushed and sanded surfaces provide different texture levels for projects with specific appearance and finishing requirements.
Key Product Benefits
Moisture Resistance
The composite structure is suitable for outdoor areas exposed to rainfall, humidity and regular moisture, including landscape applications close to soil and planting areas.
Dimensional Stability
Controlled profile dimensions and consistent material distribution support accurate board positioning and joint alignment during assembly.
Low Routine Maintenance
The composite surface can be cleaned as part of normal outdoor maintenance. The material is suited to projects where routine surface treatment needs to be limited.
Technical Specifications
|
Parameter |
Specification |
|
Material |
60% Wood Fibers + 35% HDPE + 5% Additives |
|
Structure |
Solid / Hollow |
|
Profile Size |
140 × 25 mm / 145 × 21 mm / 140 × 23 mm / 140 × 20 mm / 140 × 22 mm / 138 × 24 mm |
|
Length |
1.8–5.9 m |
|
Surface |
3D Embossed Wood Grain / Brushed / Sanded |
|
Profile Type |
Traditional / 3D Embossed |
|
Color |
Standard / Custom |
|
Custom Dimension |
Available |
|
Service Life |
25–30 years |
Size & Profile Selection
Solid Board
Solid profiles suit landscape components where the board section, fixing points and local loading require a denser construction.
Hollow Board
Hollow profiles can be selected where lower board weight is useful and the supporting frame carries the main structural load.
Length Planning
Standard lengths from 1.8 to 5.9 m allow cutting plans to be matched with installation dimensions and joint positions. Custom lengths can be specified for defined project requirements.
Installation Considerations
Support Structure
Support spacing should be coordinated with board dimensions, fixing locations and the expected load on the completed structure.
Cutting & Drilling
Boards can be cut and drilled during site or workshop fabrication. Cutting plans should allow for final dimensions, joint positions and fixing points.
Quality Control Points
Dimensional Consistency
Width, thickness and length should be checked against the approved product specification to maintain alignment between connected sections.
Surface & Color
Surface texture and color should be checked against the approved reference before production. This provides a defined basis for repeat quantities on the same project.
Project & Custom Options
Custom Profiles
Width, thickness, length and cross-sectional configuration can be specified for defined landscape structures and installation requirements.
Color Matching
Custom colors and surface patterns can be specified when the project requires a defined visual reference.
Drawing-Based Production
Technical drawings can be used to confirm profile dimensions, section geometry, surface requirements and other production details before manufacturing.
Typical Project Uses
WPC Landscape Board is suitable for garden edging, raised planting beds, planter structures, landscape borders, garden partitions, outdoor decorative structures and commercial landscape installations. Profile selection should consider board dimensions, support spacing, fixing method, exposure conditions and expected loading.
FAQ
Q: Can WPC Landscape Board be used for raised garden beds?
A: Yes. The board is suitable for raised planting beds, garden borders and planter structures exposed to outdoor moisture and soil conditions.
Q: Are solid and hollow profiles available?
A: Yes. Both structures are available. Selection depends on the required section rigidity, board weight and supporting construction.
Q: What standard lengths are available?
A: Standard lengths range from 1.8 to 5.9 m. Custom lengths can be specified for defined project requirements.
Q: Can the board dimensions be customized?
A: Yes. Width, thickness, length and profile configuration can be specified according to confirmed project requirements.
Q: Which surface finishes are available?
A: 3D embossed wood grain, brushed and sanded finishes are available according to the selected profile and production specification.
Q: What information is needed for an enquiry?
A: Provide the required profile size, structure, length, surface, color, quantity and application. A technical drawing can be included when a custom profile or section is required.
Hot Tags: wpc landscape board, China wpc landscape board manufacturers, suppliers, factory, Classic Traditional WPC Decking, Composite Deck Stair Nosing













